machine hall Hosokawa Alpine
MZM & MZF Multi-Plex

MZM & MZF Multi-Plex

  • Gravity classifier for sharp separations in the range of approx. 0.1 – 10 mm
  • Single- or multi-tube classifier
  • Low-maintenance and low-wear design

Alpine offers zigzag classifiers in two different designs: MZM and MZF. Each design is available in a range of machine sizes from a single-tube to a multi-tube classifier. Ideal for sharp separations in the range d97 = approx. 0.3 - 10 mm.

Throughputs can range from a few kg/h in the case of the laboratory classifier up to approx. 200 t/h for the industrial-scale multi-tube classifier. Classification takes place at every change in direction of the zigzag tube and permits an extremely high, steplessly adjustable precision of cut. The result is clean-cut fines or lightweight material, even under overload conditions.

  • Maintenance-free and wear-resistant
  • Overload-proof
  • Insensitive to changes in the feed material composition

As a result of these characteristics, once set, the classifying system can be operated over long periods without any supervision at all.

Applications

  • Oleiferous seeds: classifying systems for separating cracked soy beans or sunflower seeds
  • Precious metals: the separation of copper, aluminium or lead from the insulation material of previously cut cable scrap, Dust removal from plastic granules, coke, chalk, fertilisers, bauxite, etc.

Your contact

Please tell us your area of interest and where you are from.

Planning the entire process

It’s not just building a machine – we support your projects from consulting to maintenance.